Industry reports show that there are almost 64,000 accidents in construction sites every year. Some of the injuries arise out of body stressing, falls, and hard objects falling on people. Those in charge of construction sites are required by law to take appropriate measures to ensure safety. There are, however, certain things you can do to reduce the possibility of getting hurt. Let’s explore some of them in detail below.

1. Keep Your Awareness Levels High

Be very conscious of your movements while on a construction site. Keep a close watch on your surroundings. Now is not the time to scroll through your phone as you walk around. You need to be aware that you could fall, or bump into the cutting and grinding machines.   Ensure that the machine operators can see you. They are busy, so do not assume that they have eyes in the back of their heads. Talk with someone who knows the site well to avoid dangerous areas.

2. Keep a Safe Distance from Operating Machinery

Do not go too near any machine that is operating. You should keep a safe distance from it so that the operator has sufficient space to maneuver. An accident can occur without any warning.

3. Watch Out for Hazard Areas

hazard orange cone

Certain areas within a construction site are hazardous. Some of the areas may have markings, thus giving a sufficient warning. It could be through the use of safety nets, guardrails, safety codes, among others. However, some areas may not have the safety markings, so you need to be careful. If you do not have good knowledge of the construction site, do not walk around on your own.

4. Wear the Correct Gear

When you are thinking of visiting a construction site, there is certain gear you need to have. Visit your hardware store, or buy safety vests online. Also make sure you have a helmet, protective eyewear, protection for your ears, clothing that is visible from a distance, and steel toe boots.

5. Be Careful About How You Use Equipment

Use the correct equipment for the right job. Also, be careful about how you mount and dismount any of the machines. Do not jump down from the machinery. You could break your leg or land on a piece of equipment or construction material. When you are wrapping up for the day, unplug all the power cords and store them safely away. If you are working on an area that requires the use of a ladder, make sure you get one with the correct height. You should never stretch to reach a particular place. You may fall off, or the ladder may tip over.

When you are on a construction site, you need to be very careful to avoid injury. Wear the correct gear, be aware of your surroundings, and use the right equipment for the right job. You must follow all the rules and regulations about construction sites to avoid injury or fatality. Safety begins with you, and that is why you need to be very careful.

Scroll to Top