If you look into a maintenance toolbox, you will see one type of pipe sealant or another. However, getting the nearest sealing material you can find will surely bring problems. Some of the basic issues you are likely to encounter include contamination, leaks, plant downtime, and pipe system damage.

When you encounter a problem with your system, the best thing to do is to call a professional. Reliable plumbing experts in Salt Lake City will surely know the appropriate sealant to use to seal pipe fittings or block leak paths. Generally speaking, these sealants are divided into three types. Note that a product’s availability will also influence the option that your technician uses, but each kind has recommended uses that line up with its properties.

Teflon Tape

This tape is typically white and non-stick. It works as a lubricant for the threaded parts of the piping system during assembly. Teflon tape is inherently slippery so that it serves the purpose easily. If not used properly, the tape may cause clogging on threaded paths because it does not stick to surfaces. The tape needs to be wrapped carefully during installation so that it does not unravel. One of the benefits of this sealant is that it can be used quickly without leaving a mess. One can assemble system components fast without damaging the threads.

While Teflon tape has an unspecified shelf life and is easy to carry, it does not always make for a secure seal. The tape is fragile and thin, so bits of it can get into the fluid system to clog the screens, filters, and valves. It needs to be dislodged during adjustments. Additionally, the tape should not be used in high-pressure systems, but it is adequate for standard fittings and water pipes.

Pipe Dope

Man connecting white pipesThis sealant has been in use for decades in industrial applications. Pipe dope is usually applied with a spatula or brush and has a solvent carrier. It hardens soon after the evaporation of the solvent. The seal binds to the pipe, blocking leak paths. Since it has solvent, the sealant shrinks over time as more of the solvent evaporates. This means that the dope can pull from the thread or crack creating leaks.

This sealant is affordable and easy to use with any material, including plastic. The only downside is that aging causes a loss in effectiveness. To increase its life, dope can be used in pipes with minimal vibration, heat, and pressure.

Anaerobic Resin Compounds

This type of pipe sealant utilizes cure chemistry that starts at the application of the sealant and removal of air. Without solvent, the material that has been cured keeps its sealing properties even with aging giving the sealant excellent temperature resistance. It can be used to fill voids between threads and is easy enough to take apart with hand tools. The only downside for this sealant is compatibility with some piping material.

No sealant is foolproof. To use any of the sealants will require careful consideration. For example, wrapping Teflon around a pipe thread can cause burrs inside the fitting to roll it around. The leak that forms only shows up once the job is finished. At that point, you already have a mess. For you to avoid such a mess, opt for plumbers with experience.

Leave a Comment

Your email address will not be published. Required fields are marked *